Quote:
Originally Posted by Dan296  omg the wrecking balls look so terrible! what there they thinking! its so bad....but the crushing claws look good, and combined with the ram back thing you could say its CC/ST.
you need to clean FW stuff? i did not know this....
nile child, your friend needs to pin it. its resin, but itll still work and that 6 inch greater deamon looks alot more intimidating when its arms arent falling off. |
just like plastic and metal models, the resin models will sometimes have excess flash and a few moldlines to clean up... the thing to keep in mind is NEVER! and mean NEVER, EVER!!! use a file as resin dust is about as healthy as sanding down glazed clay!
unless you have proper protection and a well ventalated area, you'll need to stick with your trusty hobby knife to clean up your forgeworld models!
also, it's a good idea to give all the pieces a wash in some soapy water to clean off the mold release coating...
not doing that will result in your primer coat flaking off!
cheers!