ok so here goes step 3.
Step 3: Washes. ok i start out on the metalic using a 1:3:2 wash of black/brown/green with about 50% water. i give it 2 or 3 coats. then go onto a straight brown wash about 60% water maybe a touch of black. then start apliying this to joints and high edges.i do about 3 passes of this.then for the reds i mix a 1:2:3 mix of black/red/brown wash and ply a few coats to the red areas..
heres pics fron step 3.
next step, begin highlighting.