Thread: How to Build a Combi-Flamer
View Single Post
Old 12-03-2007   #2 (permalink)
iNsOmNiAc'S dReAm
Adeptus Arbrites
 
iNsOmNiAc'S dReAm's Avatar
 
Join Date: Sep 2007
Location: Honolulu, Hawaii
Posts: 393
Rep Power: 1 iNsOmNiAc'S dReAm will become famous soon enough
Thanks: 88
Thanked 51 Times in 32 Posts
Default
Continued



Cut a length of copper wire and dry fit everything together and make adjustments as needed. Once your sure of everything, glue it all together. Remember to leave a millimeter or two of the tubing to stick out of the front of the flamer.



Step 6: The last step is just to pin your bolter barrel in place. Use some left over copper wire for you pin and remember to drill out the little details in the gun barrel to give it that extra realism.

Remember how I said to put that gun barrel someplace safe? Well I didn't and lost mine, so after crawling around the floor for 15 minutes and returning empty handed I had scratch built one out of part of the old flamer body. LEARN FROM MY STUPIDITY!!!!



Step 7: Finally we got ourselfs a pretty impressive Combi-Flamer, if I do say so myself. So the last step would be to pat yourself on the back and go perge some heretics in HIS Holy name... Happy Modeling
__________________
( WARNING!: This product has been known to cause cancer in the state of California, as well as unexpected and unexplained pregnancy in test subjects. If rash or excessive hairiness developes, discontinue use and seek veterinary assistance IMMEDIATELY!)

Quote:
Drax says:
Insomniac's Dream - master of a thousand inner conflicts
Last edited by iNsOmNiAc'S dReAm; 12-03-2007 at 01:16 AM.
iNsOmNiAc'S dReAm is offline   Reply With Quote
The Following 10 Users Say Thank You to iNsOmNiAc'S dReAm For This Useful Post: