[munkey joe paints]

Well Hi again everyone!! Ths is a WIP bunker complex that Radeon and I are building. these are the original plans sent to me from Radeon. This bunker complex has a HUGE foot print of 24" X 12" X 10" and still has to be set on the pink foam base!!! this will raise it roughly another inch or 2.


Now after these we made the Cardboard mock up MKI and tweaked it into what will be the Learning curve, trial and error stage. pics of MKI cardboard bunkers here:





Now dealing with ballistics,physics and other things we learn that a flat surface absorbs 100% of kinetic energies from a projectile. Also we like to see a fortified area to help support upright structures. So this brings us to Bunkers MKII. This is the stage that I made sketchups and true planning for the project. We angled the walls by giving them a 1" greater area than the top. we changed the rear of the bunker for access to both sides via a catwalk and other little tweaks. Now these are rough sketches made for planning so the door on the back is not there and all buildings will have a edge as in the middle building. Ordering of the materials will be this next week and construction will be very soo after that. let me know your inputs and comments for this project. and DONT make fun of my winged skull!!!



And the rough placement of some details and gunports: